1X2 Non-Latching Optical Switch with Connectors

                                                  

1x2 Fiber optic Switch

Product Description

The 1x2 fiber optic switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The switch has integrated electrical position sensors. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost.

Performance Specifications

1x1Mechanical optic Switch
Typical
Unit
Wavelength
1260~1620
nm
Insertion Loss
<0.6
dB
Wavelength Dependent Loss
<0.15
dB
Temperature Dependent Loss
<0.25
dB
Polarization Dependent Loss
<0.05
dB
Return Loss
>55
dB
Cross Talk
>55
dB
Switching Time
<5
ms
Repeatability
<±0.02
dB
Durability
>10 Million
Cycles
Operating Optical Power
<500
mW
Operating Voltage
3~5
V
Switch Type
Non-Latching/Latching
Operating Temperature
0~70
ºC
Storage Temperature
-40~85
ºC
Fiber Type
SMF-28E FIber
Package Dimension
(L)27.0×(W)12.0×(H)8.2
mm

1x2 Fiberoptic Switch

Mechanical Dimensions (Unit:mm)

Electrical Drive (non-latching normally off)

Latching

Optical Path
Electrical Drive
Pin1
Pin5
Non-Light
GND
+5V Pulse
P1-P2
+5V Pulse
GND

Latching

Optical Path
Electrical Drive
Pin1
Pin10
Non-Light
---
---
P1-P2
+5V Pulse
GND